1.75mm Bambu Lab PPS-CF (750g) (With Spool)

Bambu PPS-CFPPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide. The combination of PPS resin and carbon fiber gives PPS-CF exceptional properties, including excellent resistance to solvents, corrosion, heat, and flames. Additionally, it offers superior strength, stiffness, and dimensional stability, making it a specialized engineering plastic that meets the demands of unique and challenging applications. Product Features	Ultra-High Heat Resistance	Top-tier Flame Retardancy	Peerless Mechanical Properties	Solvent and Chemical Resistance	Ultra-Low Water Absorption	Comes with Cardboard Spool	Diameter: 1.75 mm +/- 0.05 mmCautions for Use	For X1E Printing Only	0.2 mm Nozzle Not Compatible	Stainless Steel Nozzle Not Recommended	AMS & AMS lite NOT Compatible	Must Be Dried before Use to Achieve Optimal Print Quality Ultra-High Heat ResistancePPS-CF boasts a heat deflection temperature of up to 264°C under 0.45 MPa and can continuously operate at temperatures exceeding 200°C. This significantly outperforms normal PA-CF materials, which have maximum temperatures around 190°C and 120°C. Its exceptional heat resistance ensures outstanding creep resistance, making PPS-CF ideal for demanding industrial environments and applications Superior Flame RetardancyPPS-CF achieves a UL-94 V-0 flame retardant rating, offering superior safety and reliability in critical areas such as electronics and automotive components. PPS-CF provides long-lasting durability and peace of mind even in the most demanding environments. Unmatched Mechanical PropertiesCombining the stiffness of PPS polymers with the reinforcing power of carbon fiber, PPS-CF offers exceptional stiffness, bending strength, and tensile strength. Its superior dimensional stability and resistance to warping ensure that large-scale prints maintain precision and avoid deformation during the printing process, making it perfect for high-precision applications. Solvent and Chemical ResistancePPS-CF offers outstanding solvent and chemical resistance, second only to PTFE (Teflon). It remains virtually insoluble in any solvent below 200°C and exhibits exceptional resistance to acids, bases, and salts under normal conditions. This makes PPS-CF the ideal choice for challenging environments where chemical stability is critical. Ultra-Low Water AbsorptionWith an extremely low moisture absorption rate of just 0.05%, PPS-CF ensures that its mechanical and thermal properties remain stable even in humid conditions. Unlike normal PA-CF, which can soften and degrade when exposed to moisture, PPS-CF maintains its strength and durability, making it the superior option for applications requiring high moisture resistance. Bambu PPS-CF Printing Guidelines:	Nozzle Temperature: Recommended range is 310 to 340°C.	Chamber Temperature: Recommended range is 60 to 90°C.	Tip: Using higher values within these ranges can enhance the mechanical properties of the printed parts, especially in the Z-direction. Drying Recommendations:	Drying Temperature:In a blast drying oven: 100°C to 140°C for 8 to 12 hours.On an X1 printer's heatbed: 110°C to 120°C for 10 to 12 hours (less effective than a blast drying oven).	Important Note: Higher temperatures within the drying range yield better results, but do not exceed 160°C to avoid damaging the spool.	Additional Information: For more details, refer to Printing tips for Engineering materials on WIKI. Storage Tips:	Storage Condition: To prevent the filament from absorbing moisture, use an airtight storage container with desiccant during printing.	For Further Details: Please refer to Printing tips for Engineering materials on WIKI. Annealing Prints:	If you need to anneal the prints, please refer to the Technical Data Sheet (TDS) and the WIKI section Work After Printing Finished. Downloads:	Filament TDS	Filament MSDS